100W UV Curing Floodlight/Spotlight LED Resin Lamp 395/ 365/ 405nm Fast for SLA DLP 3D Printer | Лампы и освещение

100W UV Curing Floodlight/Spotlight LED Resin Lamp 395/ 365/ 405nm Fast for SLA DLP 3D Printer | Лампы и освещение

Note: To measure the power of UV lamps, you need to purchase a professional UV instrument for testing. Using power measurement is a wrong test method

Reflective cup UV curing lamp, more concentrated energy and stronger penetrating power

Note: Because the 30W and 50W lamps are too small to fit the movable bracket, I'm really sorry.

[Product Features] Cold light source, no heat radiation, the surface temperature of the illuminated object is low, and it solves the traditional thermal injury problem. Particularly suitable for LCD edge banding, film printing, etc .;

[Usage] The LED ultraviolet lamp should be as close as possible to the surface of the cured object. The closer the distance, the better. It is best to keep it within 0.5-1 cm. Too long irradiation distance will seriously affect the curing effect;

[Scope of use] UV curing (shadow-free adhesive \ ink \ resin film), photochemical catalysis, medical physiotherapy, aging test, UV printing, plastic printing, diazo copier, mobile phone LCD screen, etc.

[Reminder] To achieve the best curing effect, two points must be paid attention to:

First, the wavelength of the light curing agent contained in the UV glue must be the same as the wavelength emitted by the UV lamp;

Second, the ultraviolet energy emitted by the UV lamp must meet the energy required for curing the UV glue, and the ultraviolet energy is proportional to the power of the lamp. (It is best to consult the glue supplier before buying, and the UV glue needs to be cured).