Hantek HT30A BNC to Dual Banana Head Test Line Auto Leads Adapter Cable 3M Free Shipping | Oscilloscope Parts & Accessories

Hantek HT30A BNC to Dual Banana Head Test Line Auto Leads Adapter Cable 3M Free Shipping | Oscilloscope Parts & Accessories

4,9

All stars

The wire produced by hantek took for the oscilloscope. The length corresponds to the declared characteristics.

The cables are a little bit thinner then they look in the picture but they look well made and two weeks to Ireland was excellent service.

Good quality, not the cheapest leads but length comes handy.

Features:
The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
High quality and professional high voltage auto test lead.
It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
It adopts full shield which can help reduce the noise interference.

Note:
To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length.
The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.

Specifications:
Probe Quantity: 1 pc
Peak Attenuation Ratio: 10000：1
Input Resistance: 50Ω
Length: Approx. 2.9m / 9.5ft
Item Weight: 148.5g / 5.2oz
Package Size: 24.5 * 17.5 * 3cm / 9.6 * 6.9 * 1.2in
Package Weight: 154g / 5.4oz

Package List:
1 * Auto Test Lead