1Phase EV Charging Station Cable 32A Electric Car Charger With Type 2 Plug 7.6KW EVSE Level IEC 62196-2 Standard For Tesla | Автомобили и

1Phase EV Charging Station Cable 32A Electric Car Charger With Type 2 Plug 7.6KW EVSE Level IEC 62196-2 Standard For Tesla | Автомобили и

If you are a buyer in France, you can enter the follow discount codes when paying for your orders, to enjoy the extra discounts During 12/1 09:00 - 12/4 09:00:

(Note: Only three days available)

RM47085554674295626

32 Amps, 240V, 7.6kw, Level 2 Home EV Charging Station

Easy to use, do not need an APP to run it or home network connection

The station uses plastic and ABS material to be stronger. Button start mode and easy installation

LCD to display all the car's data on the charging station during charging. You can see the state of charge, including current, voltage and temperature. The screws are fit into the box so you don't have to worry about the screen falling. The 20ft cable leaves enough space between your car and the charging statio

Installation Method: Wall/Stand

Mode: C(with plug)

IP Rating: IP65

Rated Voltage: 220V - 240V

Rated Current: 32A

Maximum Power: 7.68KW

Phase Mode: Single Phase

Operating Temperature: -40°C ~ +70"C

Enclosure Material: ABS+PC alloy

Length of Cable: 6.1m

Diameter the electric wire: 2*8mm²+1*6mm²

EV charging station *1

Metal back plate *1

30mm screw *10

Plastic bolt *10

10mm screw *4

User manual *1

Hook *1 (gift)

Type 2 suitable for EV as below:

AUDI: Q7 E-Tron, A3 E-Tron, E-Tron Quattro, E-Tron Sportback

RENAULT: Zoe, Zoe 2013, Kangoo ZE 2014-2019

BMW: i3, i8, 94AH 3Rex, 2 Series, 530e, 22Sxe, 330e, 740e, XS

TESLA: X, S, 3. Kia: Niro, Niro Phev, Optima Phev

MERCEDES-BENZ: B Class E-Cell, GLE SOOe, E 350e, S500 PHEV, EQC 400, $LS EV, EQA, Vito E -Cell Van

PORSCHE: 918 Spyder, Taycan-Mission E, Cayenne, Panamera S PHEV, Panamera 4 E­Hybrid

VOLKSWAGEN: E-Up, E-Golf, Golf GTE PHEV, Golf 1.4 TSE, Passat GTE, I.D

VOLVO: S90, V90 TS, V60 PHEV, XC90 TS

HYUNDAL: Loniq Electric, Loniq Plug-In, Kona

MINI S E Countryman 2017. RANGE ROVER P400e. RIMAC Concept One.

BYD E6. MORGAN EV. JAGUAR i-Pace. MAHINDRA E20. NISSAN Leaf 201 S.

TOYOTA Prius Plug-In-Hybrid 2018.

Installation Guide:

1.Drill holes according to the position of the iron plate

2. Hammer the 30mm plastic bolts into the holes

3. Fix the iron plate with 30mm screws on the wall

4. Embed the wall box into iron plateon the wall

5. Mounting screws from both sides. You can put the hook anywhere you need. The cable can be hungon the hook

6. Connect the power wire to the distribution box. This is the final completion picture after you successfully install the wall box

Instruction For Use:

1. Make sure the wall box is connected to the power

2. Press the button on the wallbox to start/stop charging

3. Connect the EV and the wallbox with the charging plug

Cautions:

This is a Mode 3 EV charging station only for Electric Vehicles with Type 2. Don't use it for EVs with other types of inlet.

This product is only for EV charging. Please do not use it for any other purpose.

Failure to follow instructions may result in danger.

Children are prohibited from touching charging station.

Do not dissemble the charging station while it's operating.

Install the charging station away from spark-throwing, dusty or corrosive places.

Only use the charging station when it's normally operating and please strictly follow the instructions.

The charging station produces high voltage output. You must pay attention to personal safety when using it.

Any direct damage or malfunction caused by neglect, incorrect use/installation, repair by the users or natural damage are not covered by the warranty.

RM47085554674295628