The programmer is universal for matrices with a 30pin (CCFL) cable and 40pin (led) cable. Allows you to reset the EEPROM chip of laptop matrix |

The programmer is universal for matrices with a 30pin (CCFL) cable and 40pin (led) cable. Allows you to reset the EEPROM chip of laptop matrix |

The programmer serves for the firmware of the matrices when replaced in the laptop. Many modern models of laptops, have standard matrices, but with a unique firmware for this model. When trying to replace a matrix in such a laptop, even when selecting a matrix with a similar part number and from a similar manufacturer-does not give warranty, that it will start. Even if the matrix starts, then the defects of the image can be visible (color strips on the screen, distortion of color gamut, incomprehensible symbols on the display). The reason for this is the lack of firmware in the EEPROM chips of the original and new matrices. The programmer allows you to merge the firmware from the EEPROM chip of the original matrix and, or save it on the computer, or pour in EEPROM of the replacement matrix. After this procedure, the new matrix will work absolutely identical to the previous one. There is a steady tendency to increase the use of unique matrix firmware in laptops of the latest audits, as well as in many ultrabooks.

You can safely say that this programmer will be in demand by any service, which is professionally engaged in replacing the matrix for the laptop, because soon it will be almost impossible to install the matrix in the laptop without firmware.

In addition to the fact that the programmer is now an extremely necessary thing for any service, which is professionally engaged in the replacement of laptop matrices, it also very quickly pays off. At the cost of one firmware in 300-500r, the purchase of a programmer for laptop matrices will pay off through 20-30 pereushyvok, I. e. Often within a month.