100cm EVA Foam Fish Ruler for Fishing Boats Yacht Non-skid Surface Strong Self Adhesive Pad Waterproof Measurement |

100cm EVA Foam Fish Ruler for Fishing Boats Yacht Non-skid Surface Strong Self Adhesive Pad Waterproof Measurement |

40"/100cm EVA Foam Fish Ruler for Fishing Boats Yacht Non-skid Surface Strong Self Adhesive Pad Waterproof Fishing Measurement devices

The fish rulers offer a permanent & attractive alternative to stickers, tape measures, and other measuring devices. Offered in a 5mm thickness with a brushed texture, these rulers are 4.5"x42", feature laser-etched numbers that will not fade or break down, and utilize peel-and-stick 3M pressure-sensitive adhesive for easy installation. As well as providing traction underfoot, this fish ruler provides a non-skid surface for holding slippery fish in place for measurement. 

Features:
-Non-skid EVA Foam provides exceptional traction even when wet
-Strong adhesives paired with durable materials hold strong in Saltwater, Freshwater, rain, sun, frozen temps
-The effective measuring length is 40 inches/100cm. The scale is 100% standard
-Super easy to clean, and the surface will not absorb sewage
-Laser-etched numbers that will not fade or break down

Specification:
Material: EVA
Color: As shown
Texture: Brushed / Embossed
Size: 1067mm X 115mm X 5mm (42" X 4.5" X 0.2" )
Glue: Strong 3M glue on the back

Package Include:
1 x Self-Adhesive Fish Ruler

Installation Instructions:
The only items you'll need for your installation should be window cleaner and a clean cloth.

Thoroughly clean the area where it will be applied. We recommend using a cleaner that will not leave any residue. A glass cleaner used with a clean cloth or scotch-bright pad works well. Make sure the area is completely dry before applying the pad.

If there is any glue, grease, adhesive, or other substances on the area that the pads are to be applied, mineral spirits followed by acetone may be used to remove them. Be sure to use a glass cleaner afterward as suggested above. Again the platform surface must be completely dry before applying the pad.

If pads are being applied to a new boat right from the factory it is very important that all mold release is thoroughly removed from the boat surface. Be sure to check with the boat manufacturer before applying the pads. 


Notice:
1.Please allow 1-5mm error due to manual measurement.
please make sure you do not mind before you bid.
2.The colors may have different as the difference display, please understand.