100MHz Function Signal Generator Digital DDS Dual-channel Signal/Arbitrary Waveform Source | Инструменты

Features:
Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.
2.4 inch TFT color LCD with 320*240 resolution, simultaneously display parameters and graphics of CH1 and CH2.
Adopt MagicPulse Technology, Low Jitter(RMS)<200ps.
The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 300MSa/s sample rate, 14bits vertical resolution.
Can output up to 99 groups of functions / arbitrary waveform, contains 35 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~12V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.
Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits; (The longer the waveform storage depth, the more detail the waveform is saved, and the signal details can be restored with high precision.)
Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
Sweep Function: it can sweep 4 properties of signals including frequency, amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions.
VCO Function (Voltage Control Output): can be achieved by an external input signal: voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and PWM modulations.
Burst Output Function: there has Manual Trigger, internal CH2 Trigger, and External Trigger for your options. It can output 1~1048575 pulse trains.
100M Frequency Meter Function: it can measure frequency, period, pulse width and duty cycle. Max. frequency workable is 100MHz and Min. frequency workable is 0.01 Hz.
Counter Function: it has 2 coupling measure modes including DC coupling and AC coupling. This design can solve inaccuracy problem of AC coupling.
Standard dual full functional channels which are equivalent to two independent generators.
Channel SYNC Function: support waveform copy and state copy between channels.
Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted.
Precisely adjust the phases of the two channels. Precision can be 0.01°.
Min amplitude resolution can be up to 1mV. Amplitude range is 1mV~25Vpp.
Duty-cycle of each channel can be adjusted independently 0.01%-99.99%, the adjusting resolution is 0.01%.
-12V~+12V DC Offset function. Resolution 0.001V.
Save Function: it can save 20 sets user-set parameters and can be loaded at any time.
Communicating Function: all functions can be controlled by PC program and the communication protocol is open for secondary development.
Output Short-circuit Protection: all channels can work more than 60 seconds when the load is short-circuited.
Provide powerful waveform editing PC software. Users can download arbitrary waveform to this instrument after edit through PC program which is included in user CD.
Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide range voltage power supply.

Specification:
Plug Type: AU / EU / US / UK (Optional)
 

Frequency Model FY6900-100M Sine 0~100MHz Square 0~25MHz Ramp, Triangle 0~10MHz Pulse 0~10MHz TTL/CMOS 0~10MHz Arbitrary Waveform 0~10MHz Minimum Pulse Width 20ns(All models of pulse wave minimum width can reach 20ns) Min. Resolution on all frequency range 1μHz (Min. resolution can reach 1μHz on all frequency range to ensure adjusting accuracy under high frequency. For example, it can output 10.000000000001MHz signal). Accuracy ±20ppm Stability ±1ppm/ 3hours Waveform Characteristics Waveforms Sine, Square, Rectangle (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform. Non-Volatile Storage Can store 64 user-defined arbitrary waveforms, (8K 14bits) * 64 Waveform Length 8192 points * 14bits Sampling Rate 300MSa/s Vertical Resolution 14 bits Sine Harmonic Suppression ≥50dBc(<1MHz); ≥45dBc(1MHz~20MHz); Total Harmonic Distortion <0.5% (20Hz~20kHz,0dBm) Rectangle Rise/Fall Time ≤7ns (VPP<5V) Overshoot ≤5% Duty Cycle 0.01%~99.99% (Resolution 0.01%) Sawtooth Wave Linearity >99% (0.01Hz~10kHz) Output characteristics Amplitude(VPP) Frequency≤5MHz: 1mVpp~25Vpp;
5MHz<Frequency≤10MHz: 1mVpp~20Vpp;
10MHz<Frequency≤20MHz: 1mVpp~10Vpp;
20MHz<Frequency≤60MHz: 1mVpp~5Vpp;
60MHz<Frequency≤80MHz: 1mVpp~4Vpp;
Frequency>80MHz: 1mVpp~3Vpp; Resolution 1mV Amplitude Stability ±0.5%/ 5 Hours Amplitude flatness ±2.5%(<10MHz);±5%(>10MHz) Waveform Output Impedance 50Ω±10%(Typical) Protection All channels can work more than 60 seconds when the load is short-circuited.  DC Offset Offset Range Frequency≤20MHz: ±12V;  Frequency>20MHz: ±2.5V; Offset Resolution 1mV Phase Feature Phase range 0~359.99° Phase resolution 0.01° TTL Output TTL Level Amplitude >3Vpp Fan-out >8 TTL LOAD Rise/Fall Time ≤10ns CMOS Output Low Electric Level <0.3V High Electric Level 1V~12V Rise/Fall Time ≤18ns External Measurement Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle Input Voltage Range 1Vpp~20Vpp Frequency Meter Resolution 0.01Hz (Gate Time = 100S) Range 0.01Hz~100MHz Sensitivity Gate Time 3 grades (1S, 10S, 100S) adjustable Counter Range 0-4294967295 Coupling DC, AC Working Mode Manual Period Measurement Range 5ns ~ 20s DC coupling measurement Pulse Width Measurement Range 0ns ~ 20s Resolution 5ns Duty Cycle Range (Display) 0% ~ 100% Sweep Carrier Waveform Sine, Square, Ramp, Arbitrary (except DC) Sweep Type Linear or Logarithm Sweep Direction Up, Down and roundtrip sweep directions Sweep Objects Frequency, Amplitude, Offset, Duty Cycle Sweep Time 0.01S~999.99S/Step Setting range Starting position and Finishing position can be set arbitrarily. Sweep Range Decided by Parameters setting. VCO (Voltage Control Output) Modulation signal range to input 0~5V VCO signal frequency range 0-2000Hz VCO control object voltage controlling frequency (VCF), voltage controlling amplitude , voltage controlling offset, voltage controlling duty cycle. VCO special function Can Amplitude Modulate (AM) or Frequency Modulate (FM) by external analog signal. Modulation Modulation Type AM, FM, PM, ASK, FSK, PSK Carrier Waveform Sine, Square, Triangle, Ramp, Arbitrary waveform (Except DC) AM Source Internal (CH2) / External (VCO IN Port) Modulating Waveform Sine, Square, Triangle, Ramp, Arbitrary waveform Depth 0% to 120% Modulating Frequency Internal : 1μHz~1MHz;  External: 1μHz~2KHz; FM Source Internal (CH2) / External (VCO IN Port) Modulating Waveform Sine, Square, Triangle, Ramp, Arbitrary waveform Modulating Frequency Internal : 1μHz~1MHz;  External: 1μHz~2KHz; PM Source Internal (CH2) / External (VCO IN Port) Modulating Waveform Sine, Square, Triangle, Ramp, Arbitrary waveform Phase Deviation 0° to 360° Modulating Frequency Internal : 1μHz~1MHz;  External: 1μHz~2KHz; ASK Source Internal (CH2), External (ASK IN Port), Manual Modulating Waveform Square with 50% duty cycle. Key Frequency 1μHz~10MHz FSK Source Internal (CH2), External (FSK IN Port), Manual Modulating Waveform Square with 50% duty cycle. Key Frequency 1μHz~10MHz PSK Source Internal (CH2), External (PSK IN Port), Manual Modulating Waveform Square with 50% duty cycle. Key Frequency 1μHz~10MHz Burst Function Carrier Waveform Sine, Square, Ramp, Arbitrary (except DC) Burst Count 1~1048575 Trigger Source Manual, Internal, External (AC/DC) General Specifications Display Type 2.4 inch, TFT Color Display. Save & Load Amount 20 Position 01 to 20 (01 for start default value) Interface Type USB to Serial interface Protocol Command line mode, providing communication protocols. Communicating Speed 9600bps (Industrial standard) Power Voltage Range AC100V~240V Technic SMD, LSI, Reliable and durable Buzzer Can be turned on/off by setting. Operation Buttons and knob continuously. Environment Temp.: 0~40℃, Humidity: ﹤80% Size Approx. 210mm * 195mm * 75mm / 8.27 * 7.68 * 2.96 (L * W * H) Weight Approx. 611g / 21.56oz Package Size Approx. 27cm * 21cm * 9.5cm / 10.63 * 8.27 * 3.75 (L * W * H) Package Weight Approx. 1065g / 37.51oz(Main engine, accessories and packing materials)
Package List:
1 * DDS Signal Generator
1 * Power Cable
1 * USB Data Cable
1 * BNC-BNC Cable
2 * BNC-Clip Cable

Shipping:

1.We guarantee to ship goods out within 24-72 hour after payment confirmation except holiday.
2.We ship by China post,HKpost EMS,DHL,Fedex,according to your choice when placing orders .
3.If you didn't receive the item after 45 days,please feel free to contact us.We will make all our effort to resolve the problem.
4.We are not responsible for delays causedby the customs,Import duties,taxes or other customscharges.

Warranty:

1.All items have 1 year guarantee.IF your purchase do not meet merchantable quality, fitness for purpose or match the description, We can make sure your issues are resolved .
2.For wrongly-shipped items, Please contact us in 48 hours after delivery.We will arrange to deliver the correct items or return all your payment.
3.For defective or faulty products,please take photos or videos,we would resend or refund after confirmation.