One Way Window Film Mirror Effect Glass Covering for Home Office Daytime Privacy Protecting Reflective Heat Control Anti UV | Дом и сад

One Way Window Film Mirror Effect Glass Covering for Home Office Daytime Privacy Protecting Reflective Heat Control Anti UV | Дом и сад

About this item

Superior Daytime Privacy: AFDB mirror reflective window film offers great indoor Daytime privacy for your home and office by making the Outdoor window glass show a mirror effect, while you can still see outdoor views; At night, the privacy effect will reverse so the Indoor window glass will show the mirror effect and people from the outside can see in

UV Blocking Protection: The one-way mirror window film blocks up to 99% of UV rays and 85% of infrared rays, protecting your skin from sunlight exposure and reducing the fading of the furniture; You can enjoy a safer and more comfortable indoor space in summer days

Say No To Strong Sunlight: This window tint can effectively block most of the sun to reduce heat in the summer. You and your family can enjoy a more comfortable and cool summer life with AFDB Mirror Effect Tint Glass Covering

New Glue Design: You can install our one-way window film quickly with the upgrade glue design. The new glue design makes its service life much longer than the glueless ones and will help the mirror window film cling on the window surface firmly. Don’t forget to spray a lot of water to wet both the adhesive side and window surface

Wide Application: Our one-way window film can be applied to any flat, clean, and smooth glass surfaces at home, office, kitchen, classroom, etc. an instant and economical way to control heat, reject UV and save you cooling bills

Step 1. Keep Window or Glass Clean

Step 2. Measure the window and determine size

Step 3. If you need to cut,draw lines the window film with markers. Make sure the edge of the protective film and the glass surface have a 1cm gap.

Step 4. Wet the Window or Glass with water( the more flowing water, the better)

Step 5. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the matte window film to glass), if it is difficult to tear off the protective film, you can try to tape the two sides with duct tape and then peel off.

Step 6. Squeegee away air bubbles and redundant water with a scraper or hard card (Don't move it again for 24 hours)

Step 7. Much easier than Wall Decals, 2 people work together more efficiently.

Step 8. Enjoy your works! If you want to remove it, simply peel the window film from any corner. It comes off leaving no residue cleanly.

Q1: Why does the film peel off？

A1: Clean the surface thoroughly and make sure the surface is clean enough without any dust. Make sure to remove the first tier of the protection film before applying on the window.

Q2: How can the film stick well and lets bubbles disappear？

A2: Use enough water. The more flowing water , the better.

Q3: Can I use the No adhesive self static window films if I live in the cold north?

A3: Please use a hair dryer to soften the film or soak the film in warm water under cold weather.