Heating film width 50 cm for warm floors walls ceiling incubator floor infrared Warm heating on cut Yu. Korea laminate any wall |

Heating film width 50 cm for warm floors walls ceiling incubator floor infrared Warm heating on cut Yu. Korea laminate any wall |

Welcome, dear buyer!

Not short, but about the main :):

In this description, we want to tell you in detail about the heating film and answer the most relevant questions that we receive in the personal messages of the seller about this film (by the way, our team is always in touch and answers almost immediately all the questions, so if the questions remain-write, do not hesitate, we will tell everything in detail, If you need even call, we will consult!)

Heating film can be used not only for floor, wall and ceiling heating, but for example:

For the insulation of the booth to its fourth pet;

For the insulation of the mirror, so as not to fog in the bath;

For growing seedlings;

To create an incubator (in the ribbon below we have already created such and even hatched out of it Quail 10 out of 10);

Imagine, we bought this film even for heating evidence and .... Farm of the rain,

In general, wherever it is cold and there is no direct source of water, you can use this miracle!

Now we will answer the most popular buyers questions:

Question: what is included in the kit?

Answer: only the heating film, everything else is purchased separately.

Q: What else do I need to purchase?

Answer: connecting kits (20 cm butyl rubber band + 2 Clips), backing on the lavsan, thermoregulator, the wires are all you need.

Q: How many connecting kits do I need?

Answer: with parallel film connection exactly as much as you will have strips of heating film.

Q: What are the characteristics, who is the manufacturer and what is the warranty?

Answer: Very cool, this film we are engaged in 2012, not only sale and installation in the city, so as sure 100%. Manufacturer-South Korea! Power-220 W/sq. m. Consumption 40-60 W/m. sq. The width of the copper tire is 15mm. The width of the heating element is 10mm. Film thickness is 0,338 Micron. Line cut-250mm. Warranty 10 years!

Q: How do I understand how much heating film I need?

Answer: If you don't have any heating at home and you want to use this film as the main heat source-at least 70% of the total area of the room, but don't forget't that the film can not be locked with solid objects, in order to avoid its overheating, it does not mean that it can not be put on heavy objects, You can, most importantly-on the legs.

Question: Can I cut the film?

Answer: Yes, you can cut the film on a special line, the step of the cut every 25 cm.

Q: I need several segments of heating film, but different width, can they be combined and put into one thermoregulator?

Answer: Of course, you can combine the film of any width, the main thing is that the power per square meter is the same, in our store the whole film is 220 W///

Q: Can I install this film on the old linoleum, not to remove it, but to install laminate/carpet/parquet on top?

Answer: Yes, of course, the sequence will be like this: first linoleum, then substrate, then heating film and finish floor covering.

Q: How many substrates do I need to buy?

Answer: The substrate is installed on the entire area of the room where the film will be installed, and it is used instead of the substrate under the laminate.

Q: Do I need to install the polyethylene film on top of the heating film before mounting the laminate?

Answer: You can, but not necessarily.

Question: can I not buy a thermoregulator? And connect the system directly to the outlet?

Answer: For the heating system (warm floor/warm ceiling) do not recommend! For economical and reliable operation of the heating film, the thermostat is necessary. If you want to install without a thermoregulator, for example, for heating mirrors in the bathroom or short-term use-then you can not purchase a thermoregulator,. Even for heating dogs, we recommend connecting the heating system correctly.

Question: can I not install the substrate?

Answer: For economical operation of the heating film-substrate is necessary. Due to the special heat-reflecting surface, the heat from heating the film is directed one way, so you will not warm, let's say, "ceiling neighbors" (when installed on).

Now Live Photos, exactly what we sell!:

Here is such a width-50 cm.

Please note: clamps, thermoregulator, substrate are purchased separately

South Korea! Excellent quality!!!!!

220 W/m. sq. Consumption 40-60 W/m. sq.

The width of the copper tire is 15mm.

The width of the heating element is 10mm.

Film thickness is 0,338 Micron. Line cut-250mm.

With the help of thermal film, you can not only warm the room, but also make the house more cozy.

It is installed on walls and ceiling, it is used in agricultural areas (insulation budok, creation of a brooder/incubator) but most often-mounted on the floor.

By the way, we have in sales the heating film of reliable and proven brands of South Korea: EASTEC, teplotex, leil.

Available in five versions: with a width of 30 cm, 50 cm, 60 cm, 80 cm and 100 cm. 60 cm (under the order), all other sizes are presented in our store.

IMPORTANT:

Separately purchased contact clips, substrate, butyl rubber tape and thermoregulator.

Cutting the thermal film can only be on special lines of the cut, which are marked and located every 25 cm.

The thermal film strips shall be located by contacts to the wall on which the thermoregulator will be installed later.