BIND PLUG Receiver Pair Frequency Line For AR6210 AR800 AR9020 S603 F701 Spektrum Series | Parts & Accs

BIND PLUG Receiver Pair Frequency Line For AR6210 AR800 AR9020 S603 F701 Spektrum Series | Parts & Accs

Usage method

1. Insert the frequency matching plug into the bind channel of the receiver, and insert the battery (or turn on the power supply) into any other unused channel. At this time, the LED lights of the internal receiver and the external receiver flash

2. Set the status of each channel of the transmitter (it is the protection status when out of control. Generally, the accelerator is turned on), press and hold the code matching key (light) on the remote control, and turn on the transmitter power supply (the preset full channel protection function is set here)

3.At this time, the LED light of the internal receiver changes from fast flashing to slow flashing. Within a few seconds, the LED lights of the receiver and the external receiver turn to be normally on. When the LED light is normally on, it indicates that the frequency control is completed.

4. Remove the frequency line of bind interface, power on again, and each channel operates normally.

Note：The new receiver only needs to align the frequency once. After the frequency alignment is successful, remove the alignment line when in use.