Small Particle Size Negative Ion Generator Ultra High 30KV Release Commercial DIY Air Purification | Conditioner Parts

Small Particle Size Negative Ion Generator Ultra High 30KV Release Commercial DIY Air Purification | Conditioner Parts

The product has been upgraded in function, and the new product after the upgrade shall prevail. The product only increases the functionality and performance. Please refer to the product picture description after the new upgrade. The dual-core high-voltage output insulated wire is used, the wire is safer and more voltage-resistant, and the static elimination function wire (blue wire) is added, because many buyers My friend encountered this relatively large discharge negative ion generator when it is easy to generate static electricity on the surrounding objects or the developed equipment, and also purchase an electrostatic eliminator. After research, we have integrated the electrostatic eliminator without changing any product functions. In this way, everyone can use it in an all-in-one machine in the future. The method of using this static removal line is the same as that of the static remover. If there are objects surrounding static electricity and need to link this static removal line to the object, the static electricity can be conducted away. , Be careful not to connect the static elimination wire (blue wire) to the high-voltage release wire or the brush head, otherwise the released high-voltage will be directly returned to the circuit and it will easily cause damage to the product, and it cannot be connected to the power input terminal. If there is no place to remove static electricity, this static electricity removal line can not be used, as long as it is placed aside or wrapped with tape to prevent the wire from shifting and causing it to remain unchanged. It can also be cut short, and then the exposed wire part is covered with insulating tape. can.

The description of the various wires of the product is as follows:

1. Working voltage: AC 110V/220V

2. Output power: <7w

3. Output voltage: -DC30KV±10%

4. Dielectric strength: the power cord has no breakdown in the outer box AC3700V/5mA/60s

5. Storage temperature: -20℃~+70℃

6. Humidity resistance characteristics: It can work normally when it is placed in an environment with a temperature of 25°C and a humidity of 93% for 12 hours without electricity

7. High temperature characteristics: No power, placed in an environment with a temperature of +70°C for 12 hours, take it out and return to room temperature, and it can work normally

8. Low temperature characteristics: no electricity, placed in an environment of -20 ℃ for 12 hours, take it out and return to room temperature, it can work normally

9.Drop test: 60cm from the ground, freely fall onto a 3cm thick wooden board, and work normally with electricity

10. Dielectric strength: the power cord has no breakdown of the outer box AC3700V/5mA/60s

This product comes with a multi-head launch integrated board, which integrates 18 release terminals, which are welded by default and shipped. If you don't need to connect, please contact customer service or leave a message.

110V and 220V voltages are common, the product has a strong load capacity, can carry more loads, works silently, and has sufficient discharge. The product can work continuously for 24 hours. It is suitable for customers who require large discharge, and is suitable for use in public places alone or with high demand Voltage product design.

Precautions:

1. It is strictly forbidden to insert needles and rods of metal and conductive materials into the negative ion emission port;

2. It is strictly prohibited to use in flammable and explosive environment;

3. It is not allowed to use in damp and rainy environment;

4. When using negative ion products, keep them away from food and other items as much as possible to prevent the deposition of smoke and dust;

5. After power-on and use, do not touch the launch port with your hands;

6. It is not allowed to install or disassemble this product when powered;

7. It is not easy to use on dimming circuit and electronic switch control circuit.

8. The product is prone to generate static electricity in the surrounding conductors in a dry environment. Please keep a distance of at least 100CM from the conductor to avoid interference.

9. Do not touch the carbon brush heads of the product, so as not to affect the release of negative ions.

10. It is strictly forbidden to let children play, please place it out of the reach of children.

11. When the product is used close to the wall due to the dust accumulation effect, the wall will be attached to dust and change color. Please pay attention to pad paper near the wall to isolate the dust

12. The product will drop the dust in the space to the ground. When using the product, the dust on the ground will increase than usual. Please pay attention to clean it.