Горячая распродажа коммутатора TP-LINK 8-портового SFP+ 10 Гигабит сетевой коммутатор с оптическими портами Plug and Play TL-ST1008F Antminer 10G Фибра on.

Горячая распродажа коммутатора TP-LINK 8-портового SFP+ 10 Гигабит сетевой коммутатор с оптическими портами Plug and Play TL-ST1008F Antminer 10G Фибра on.

TL-ST1008F All 10 Gigabit Ethernet Switch

1.Provide 8 10G SFP+ optical ports
2.All ports have wire-speed forwarding capability
3.Plug and play, no configuration required
4.Support IEEE 802.3ae, 802.3z standards

product description

TL-ST1008F is a full 10 Gigabit unmanaged switch, providing 8 10 Gigabit SFP+ optical ports, all ports support wire-speed forwarding, plug and play.
1. The port performance provides 8 10 Gigabit SFP+ optical ports; it adopts a store-and-forward mechanism and an internal high-capacity cache. All ports can realize 10 Gigabit non-blocking line-speed forwarding.
2. Stable and reliable mainframe with low power consumption design, natural heat dissipation in all steel shell, to ensure long-term stable operation of the product.
3. Easy to use, plug and play, no need to manage; dynamic LED indicator, providing simple working status prompt and troubleshooting.

Specifications

1. Technical standards IEEE 802.3, IEEE 802.3z, IEEE 802.3ae
2. Port 8 10 Gigabit SFP+ optical ports
3. Indicator Link/Act: Optical port indicator Power: Power indicator
4. Performance storage and forwarding support 16K The depth of MAC address table
5. Use environment Working temperature: 0℃～40℃ Storage temperature: -40℃～70℃ Working humidity: 10%～90%RH non-condensing storage humidity: 5%～90%RH non-condensing
6. Input power 12VDC/2A
7. Shell size (L×W×H) 226mm x 131mm x 35mm

Note:

M1: The switch is turned to the left, and the speed of ports 1 to 8 is 10G/1Gbps;

M2: the switch is in the middle, and the speed of ports 1-4 is 10G/1Gbps, and the speed of ports 5-8 is 10G/2.5Gbps;

M3: Turn the switch to the right, and the speed of ports 1 to 8 is 10G/2.5Gbps.

TL-ST1008F ports 1 to 8 are expansion slots for 10-Gigabit SFP+optical modules. The port speed and system mode are selected on

The switch is related to the off position: when the switch is turned to M2, the corresponding 5-8 ports have a speed of 10G/2.5Gbps, and when the switch is turned to M3, the corresponding 1-8 ports

The speed is 10G/2.5Gbps, which can be used with TP-LINK 10G optical/electrical module or 2.5G optical/electrical module; Switch to

M1 corresponds to 1~8 ports at 10G/1Gbps, and M2 corresponds to 1~4 ports at 10G/1Gbps. At this time

Use TP-LINK 10G optical/electrical module or gigabit optical/electrical module together.

It should be noted that the power consumption of the 10-gigabit electrical module (TL-SM510U) is greater than that of the conventional optical module. A TL-ST1008F can only

At the same time, connect two 10 Gigabit electrical modules, and it is recommended not to connect them side by side to avoid too high temperature rise at the access location, which will affect the performance of the module.