BeagleBone Black Rev C Development Board Kit 512MB DDR3 4GB 8bit eMMC 1GHz ARM Cortex-A8 +4.3inch LCD Screen + Cape Cables |

BB Black/BeagleBone Black development/evaluation Package C

Overview

BeagleBone Black is an MSRP community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.

---

Features

Processor: TI Sitara AM335x, 1GHz, 2000 MIPS 1 GHz ARM Cortex-A8 SGX530 Graphics Engine Programmable Real-Time Unit Subsystem MemorySDRAM: 512MB DDR3L 800MHZ eMMC Flash: Rev B: 2GB (discontinued) Rev C: 4GB (as of 2014.05.21) SD/MMC Connector for microSDPower management: TPS65217C PMIC is used along with a separate LDO to provide power to the system Debug Support: Optional Onboard 20-pin CTI JTAG, Serial Header Power SourceminiUSB USB or DC Jack 5VDC External Via Expansion Header ConnectivityHigh speed USB 2.0 Client port: Access to USB0, Client mode via miniUSB High Speed USB 2.0 Host port: Access to USB1, Type A Socket, 500mA LS/FS/HS Serial Port: UART0 access via 6 pin 3.3V TTL Header. Header is populated 10/100M Ethernet (RJ45) User Input / OutputReset Button Boot Button Power Button LED power indicator 4 user configurable LEDs Video/Audio InterfacesHDMI D type interface LCD interface Stereo audio over HDMI interface Expansion InterfacesLCD, UART, eMMC ADC, I2C, SPI, PWM Operating Power: 5V,0.35A Board Size: 3.4 x 2.1

---

Photos

---

What\'s on the LCD CAPE (4.3inch)

BB_BLACK connector : for connecting BB Black 4.3inch LCD interface : for connecting 4.3inch resistive touchscreen LCD DEBUG interface : BB Black debug interface, for connecting serial modules BOOT selection button : Boot from TF card

---

LCD CAPE (4.3inch) Photos
LCD CAPE (4.3inch) BB Black Expansion CAPE
LCD CAPE (4.3inch) BB Black Expansion CAPE back view
LCD CAPE (4.3inch) BB Black Expansion CAPE
Connecting with BB Black and 4.3inch LCD

Package Contains BB Black x 1 LCD CAPE (4.3inch) x 1 4.3inch 480x272 Touch LCD (A) x 1 USB to TTL 4-pin Wire × 1 Power Adapter US Standard 5V 2A 5.5/2.1mm × 1 USB type A plug to mini-B plug cable x 1 40-pin FFC 0.5 150mm (opposite sides contact) x1 4.3inch LCD screws pack x 1 12345678

---

Recommended Items

To get more expandability, you may also need :

RS485 and CAN interfaces provided : RS485 CAN CAPEard supported : CAPE for ard For buyer