New 850/900/1800/1900MHZ wireless home security gsm/gprs/ MMS alarm system with Camera PIR Motion Detection function |

New 850/900/1800/1900MHZ wireless home security gsm/gprs/ MMS alarm system with Camera PIR Motion Detection function |

wireless home security gsm/gprs Camera PIR Motion Detection MMS alarm system

Description
HZ-CX07 is a widely used security device based on GSM/GPRS network, switching seamlessly between different countries. It is of easy installation, and can be remotely controlled by mobile phone anytime anywhere via SMS or GPRS command. Voice & Video are recorded automatically by its sensitive infrared human body sensor and night-vision supported CMOS camera. Besides, alarm can be triggered by manual button, SMS or preset timing period with message sent to multiple groups of specific numbers.HZ-CX07 is the ideal surveillance device for home, office, factories, and shops etc., especially garage, warehouse and other occasional network places.

Function features
1.Monitoring,Alarm by picture,Alarm by video record    
2.Working under charging
3.Vibration alarm,Auto alarm        
4.Telecom calling    
5.Infrared detection within 10meters
6.PIR alarm by picture,PIR alarm by video recording,PIR alarm by voice call

Parameters
Size:L:82mm W:42mm H:25mm
Lens:Two million pixel
Video format:AVI
Video frame rate:25fps
Picture format:JPG
Battery capacity:500mah
Charging voltage:DC-5V
Working voltage:3.7V
Standby time:7-10 days
Working time:About 8 hours
Human body  induction area:8m
Monitoring area:80 Square meters
Memory support:32GTF card
Infrared night vision:10m

Main Function
PIR Sensor
Once the unwelcomed person comes to the defense area, it will take picture and save, and send to your mobile phone if you request. It supports 2 modes:

A. MMS to mobile phone
1.Passive: After somebody is detected, the alarm camera takes picture and send to mobile phone;
2.Active:  Use your mobile phone to send a command message to the alarm camera, it will constantly take picture and send to your mobile phone.

B. Save to the TF card
1.Passive: After somebody is detected, the alarm camera takes picture and save onto TF card;
2.Active:  Use your mobile phone to send a command message to the alarm camera, the alarm camera will constantly take picture and save to TF card

Video Recording
Use your mobile phone to send a command message to the alarm camera to start video recording for 1-5 minutes, it will save the file by default to TF card. After that, it will be back to stand by and wait for next command to start recording;

Picture Taking
Use you mobile phone to send a command message to the alarm camera to start taking picture, it will save picture to TF card.

Voice Monitoring
Use your mobile phone to call on the alarm camera, you can listen to the voice around it.

Packing list
1x GSM Alarm Camera
1x Battery
1x USB Cable
1x Base Mount
1x Bracket
1x User Manual