Car Code Reader Nexlink NL100 OBD2 Scanner with O2 Monitor Battery Health Test in Russian Automotive Diagnostic Tool PK AD310 |

Car Code Reader Nexlink NL100 OBD2 Scanner with O2 Monitor Battery Health Test in Russian Automotive Diagnostic Tool PK AD310 |

New Car Code Reader Nexlink NL100 OBD2 Scanner with O2 Monitor,Battery Health Test NL100 in Russian Automotive Diagnostic Tool

1.Introduction:

The NexLink NL100 OBD/EOBD+CAN code reader from NEXAS supports 10 modes of OBD tests for a complete diagnosis and battery power monitor. When it comes to diagnosing Check Engine issues you’d never go wrong with the new NL100 code reader. It offers such useful information for entry-level Pros and savvy DIYer that they can quickly and efficiently troubleshoot OBD2/EOBD problems on today’s vehicles, meantime also watch out the battery power situation.

2.Support Languages:

English, French, German, Spanish, Italian , Finish ,Russian.

3.Support Vehicles :

3.Features And Functions:

NL100 VS General OBD Code Reader:

Packing List:

1x NL100 Code Reader

1X USB Cable

FAQ Area before order:

1. Vehicle Linking Error?

A communication error occurs if the scan tool fails to communicate with the vehicle’s ECU (Engine Control Unit). You need to do the following to check up:
Verify that the ignition is ON.
Check if the scan tool’s connector is securely connected to the vehicle’s DLC.
Verify that the vehicle is OBD2 compliant.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.
Verify the control module is not defective.

2. Operating Error?

If the scan tool freezes, then an exception occurs or the vehicle’s ECU (Engine Control Unit) is too slow to respond to requests. You need to do the following to reset the tool:
Reset the scan tool.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.

If the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up:
Check if the scan tool’s connector is securely connected to the vehicle’s DLC;
Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.
Check vehicle battery to make sure it is still good with at least 8.0 volts.