Kitchen Timer Digital Countdown 2 Channel Flashing LED for Lab Electronic Homework Exercise Gym Workout Cooking | Автомобили и

Kitchen Timer Digital Countdown 2 Channel Flashing LED for Lab Electronic Homework Exercise Gym Workout Cooking | Автомобили и

[name]: two channel digital electronic timer

[size]: appearance: 9cm*8.5cm*1.5cm, display: 6.3cm*4.3cm

[battery]: AAA 7, Section 2 (this section does not have batteries, please configure it yourself)

Weight: about 108 grams

[product description]:

1. clock settings: A, press and hold the T1 button for 2 seconds, enter the clock interface

B, hold the T1 key on the clock interface for 2 seconds and enter the clock setting

C, press the SEC/MIN/HR button to adjust the time

D, press T1 button to quit and save settings

(Note: when the clock is powered down, reset the default value to PM12:00, set the interface for 10 seconds without operation, automatically exit and save

2. countdown settings: A, press the T1 button short, and enter the T1 interface

B, press the HR/MIN/SEC key to set the countdown value

C, press the S/S button to start / stop the countdown, when the green indicator light is on, and less than 1 minutes, the yellow indicator flashes. When the arrival time is red, the indicator flashes, and beeps, and goes out in a minute.

D, when the clock stops, press the HR+MIN key to clear the time value,

(Note: when the timer corresponds to the triangle blinking, the triangle is always displayed when it is stopped. The T2 settings are the same as those of T1. When the timer is in progress, the other keys are not valid except the S/S key, the T1 key, and the T2 key

3. setting the timer: A, press T1 button short, and enter the T1 interface

B, when the countdown value is 0 or the triangle symbol is displayed, press the S/S button to start / stop the timing.

C, arrives at 99:59:59, time stops automatically.

D, when the clock stops, press the HR+MIN key to clear the time value,

(Note: when the timer corresponds to the triangle blinking, the triangle is always displayed when it is stopped. The T2 settings are the same as those of T1. When the timer is in progress, the other keys are not valid except the S/S key, the T1 key, and the T2 key

4, memory settings

5, the volume can be set to "big / small / mute"

(Note: after the countdown is over, the alarm is set for one minute, and the s/s button is used to stop the call.

6. back with magnet and support, spare hanging hole, can be adsorbed on the metal surface or placed on the table, or suspension.

This model is particularly suitable for banking, telecommunications, kitchen, laboratory and other industries for limited service.

[matters needing attention]:

1, please don't cover the bell mouth

2, please do not squeeze or impact the machine, away from dusty, high temperature, humid environment

3, please use a new battery, do not mix the old and new batteries

4, please follow the instructions for use