10PCS/Lot 36pcs LED F5 12mil IR 30 Meters PCB Board Diameter 60x31mm Infrared Night Vision for Size 75 CCTV Bullet Camera Case |

10PCS/Lot 36pcs LED F5 12mil IR 30 Meters PCB Board Diameter 60x31mm Infrared Night Vision for Size 75 CCTV Bullet Camera Case |

Notice: 

1. Please look at the outer and inner sizes of the IR LED board, and make sure it is suitable for your camera case and lens. Size 60/75/90 is usually used to name IR LED board and camera case sizes, but it doesn't mean the LED board diameter or camera case diameter is exactly 60/75/90mm. Please measure your camera case carefully to avoid wrong purchasing. Normally, LED board diameter is smaller than camera case diameter. 

Specifications:

1. Traditional IR LED PCB board for 75 IR bullet camera case

2. IR distance: 10~30 meters

3. IR control: 0~10 lux (IR On), IR CUT (ICR) supported

4. Constant current: 300mA +/-5%

5. Working voltage: DC 12V

6. LED quantity: 36PCS F5 12mil LED

7. PCB diameter: outer about 60mm, inner about 31mm, suitable for CS lens

8. Constant current circuit to ensure stable images during voltage fluctuation

9. Reasonable electricity current design to extend LED board service life

10. Adopt grid design of PCB layout for excellent heat dissipation performance

11. Humanized silk-screen printing indications on board

12. Suitable camera cases: Partial size 75 IR bullet camera cases (This board is not suitable for all kinds of size 75 camera cases. Please confirm before purchasing.)

13. Power supply exceeding DC 13V may greatly reduce the LEDs' service life.

14. LED angle options for matching lens: 90 degrees - 3.6/4mm, 60 degrees - 6mm, 45 degrees - 8mm (Please leave message of your lens' angle of view so that we send the suitable LED board, or else, we will send default 60 degrees LED board for 6mm lens or send subject to stock.) --- VERY IMPORTANT!

Package Content:

10x IR LED Board

Notice: 

1. DIY CCTV camera parts are only sold to experienced users. If you are not familiar with CCTV camera assembly, we don't suggest you place order. 

2. If you are not sure about the parts size to match each other, please consult us before you place orders. 

3. Traditional IR LED board doesn't come with IR camera casing front glass and you need to buy the glass separately, but array IR LED board comes with front glass for camera casing. 

4. The product picture is subject to change without prior notice. 

5. CCTV IR lens (IR pass lens) is required to work with IR LED board to collect IR light. 

6. How to use: (a) Connect LED board CDS connector to CCTV camera CDS connector by jump wire. (b) Connect camera pigtail power input connector to LED board DC 12V connector.