2018 Diagbox V7.83 lexia with 921815C Firmware Lexia3 PP2000 V48/V25 Lexia 3 lexia-3 For Citroen Peugeot diagnostic-tool |

2018 Diagbox V7.83 lexia with 921815C Firmware Lexia3 PP2000 V48/V25 Lexia 3 lexia-3 For Citroen Peugeot diagnostic-tool |

Newest Diagbox V7.83 Lexia 3 PP2000 Diagnostic Tool Lexia3 V48 PP 2000 V25 Full Chips 921815C for Peugeot Citroen Lexia-3 Scanner

Highlights:

1. Firmware: Full Chip 921815C With 12PCS JAPAN NEC Relay+7PCS OPTOCOUPLERS

​2. Software: Lexia V48, PP2000 V25, Diagbox V7.85

3. Lexia 3 PP2000 works with most of forCitroen and forPeugeot cars from 1995 to 2015. 

4. Support read identification, read fault codes, clear fault codes,auto-scan etc.

5.Multi-Languages:English,German,French,Japanese,Russian,Spanish,Portuguese,Swedish,Turkish,Dutch,Polish,Italian,Hungary,Greek,Czech

Full Chip 921815C with Original Gold Edge:

Compatible Vehicles List:

Just as refernce, we can not make 100% sure if works or not, Need Buyer Test By Yourself!!!!

For Citroen: forC-ZERO, C1, C2, C3 DS3, C4, DS4, C5, C6, C8, forC-CROSSER, forNERO, forBERLINGO, forJUMPY, forAX, forSAXO, forBX, forZX, forXSARA, forXANTIA, forXM, forEVASION, forC15

For Peugeot: forion, 107, 206, 207, 307, 308, forRCZ, 407, 508, 607, 807, 1007, 3008, 4007, 5008, forBIPPER, forPARTNER, forEXPERT, forBOXER, 106, 205, 306, 309, 405, 406, 605, 806

Description:

lexia 3 dealers diagnostic scanner for comprehensive for Citr-oen and (Peu-eot) cars. You can do all as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed via OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Attention before submit order:

1.  Package Comes With V7.02 Diagbox Default CD, If you need V7.85 software, we will send you software link

2.  Diagbox software need install on Win7 32Bit Only, lexia and pp2000 can install on XP or Win7 32bit. These three softwares can not install on same laptop. You need install on different laptop individually. Diagbox software include lexia and PP2000. Your laptop system requires at least Intel Celeron/Pentium III 400 MHz,128 MB RAM,50MB free HDD space and USB 1.1 port (USB 2.0 recommended

3. Before install the software, please remeber to shut down your anti-virus software. And then disconnect the internet. If you do not know how to install it, please watch our video first.

4. Diagbox Update Attention: please cut the file "C:AWRoot\bin\fi\APPDIAG.SYS" out before update, and then click update package! after complete update please paste the cutted file back into the previous folder. which can avoid activating problem.

Diagbox Software Update Password:

Diagbox V7.XX to V7.76: scary01

Diagbox V7.76 to V7.82: Maitresox01

Diagbox V7.82 to V7.83: Very Simple!

5. For programming, diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password, only for citr-oen and peu-geot center repair shop has username and password, please note it.

6. It can not use for some diesel car, if need use for old car, please add 30pin cable and S-1279 diagbox

Functions:

Unlike other universal car scanner tools which only read fault codes;this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor,CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

1.Read identification

Displays complete identification of control unit, e.g. part number,software/hardware version, manufacturer, etc...

2. Read fault codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

Program supports report printing or copy to clipboard.

3. Clear fault codes

This function clears all stored fault codes and other diagnostic information.

4. Auto-scan (complete car scan/test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values

Program displays live Data like Engine Speed,Battery voltage,Oxygen Sensor,Coolant Temperature, etc.Values can be displayed in graph, 9 values at once, or full listing (all measured values).Logging to file is also supported,which allows offline analysis.

6. Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)