Silver and black touch screen keyboard rfid reader EMID proximity door enter control with 5 pieces card free | Безопасность и

Silver and black touch screen keyboard rfid reader EMID proximity door enter control with 5 pieces card free | Безопасность и

Silver and black touch screen keyboard rfid reader EMID proximity door enter control reader with 5 pieces card free             

Item type: touch screen keyboard reader

Operate model: open door by swipe card or by password

Frequency: 125khz or 13.56mhz optional

Output: wiegand 26bits or wiegand 34bits optional

Material: metal

Dimension: 120x84x23mm

Voltage: 12V

Current: 50mA

Support card: TK4100,EM4100,EM4200, S50, F08 etc

Reading range: 5 to 10cm

Ambient Temperature: -25º C to 75º C 

Ambient Humidity: 10%-90% 

Installation Description

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red DC 9V to 16V

Black GND

Green D0

White D1

Yellow BEEP

Brown LED

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

Features:

Built-in Antenna 

Built-in LED (Double Color LED) 

Built-in Loud Speaker (Buzzer) 

Real Time Data Transfer 

With Water-Proof Function 

Audiovisual indication: When a registered card is presented to the reader, the red LED flashes green and the beep sounds. 

Can be open door by card only, keypad only or both card and keypad. 

Optional model

N004A-26 (Black Color, 125khz EM ID wiegand 26  )

N004A--34 (Black Color, 125khz EM ID wiegand 34  )

N004A--M26 (Black Color, 13.56mhz rfid wiegand 26  )

N004A--M34 (Black Color, 13.56mhz rfid wiegand 34  )

Note:

This is RFID CARD READER rather than standalone controller, can not work alone, only work together with TCP/IP controller.