LCD photosensitive resin 3D printer light curing consumables General performance model | Компьютеры и офис

 

[Adapted model] Desktop-level LCD 3D printer is available (the light source wavelength range is recommended to be 395-405nm, and the 3D printer with unadjustable exposure parameters is not available).       [Material Disadvantages] Compared with the M217 model, the viscosity of the resin is slightly higher, the odor is slightly larger, the curing speed is slightly slower, and the printing effect is not good at low temperatures.   [Material Advantages] Compared with M217 resin, it has better toughness, more resistance to alcohol and acid and alkali erosion, lower heat generation and less yellowing.   [Material use] LCD machine standard resin, general performance model hand board use.       [25 ° C viscosity] 552mpa.s   [Shore hardness] 79D   [Elongation at break] 14.2%   [notch impact strength] 2.8KJ/m2   [tensile strength] 23.4Mpa   [Bending strength] 23.4Mpa