UANME X1015 Tool Knife for Rework of Mobile Maintenance Chip Edge scraping glue Shovel black Degumming Cleaning knife |

UANME X1015 Tool Knife for Rework of Mobile Maintenance Chip Edge scraping glue Shovel black Degumming Cleaning knife |

Features: 
1: the blade machining thickness is thinner than the tin point, so it can be easily done between the chip and the bottom of the plate, and it is not easy to drop the point.
 2: use it to remove the edge glue before dismantling the chip, because it is better than the blade and tweezers to make N times
 3: the difference between the warping glue and the blade or tweezers is that the blade tweezers can't be placed under the chip
 4.Easy dismantling of small and micro parts of various mobile phone main boards

 Usage method
1: when the chip is removed, the edge glue and the black glue temperature around the chip are 200
2: the hot air gun is 150 degrees, and the wind speed is 60 to the main board for 2 minutes.
3: the hot air gun is replaced with a small head, and the temperature starts at 350 degrees, first blowing the position of the knife for 10 seconds and then swaying to the bottom of the chip.
[Note: when the sway and so on, it is easy to put the knife in when the tin point is not melted and melted. ]