White Steel Flat Chisel Leather Craft Tools Hole Punch Kit Diy Tool 2 Prong/5 Prong/10 Prong | Дом и сад

Application: Leather
2 teeth usually used to make two holes in a curve bend.
5 teeth used in straight line.
10 teeth used for long straight line,it can hit 10 holes,very convenient.
Oblique flat cut selection and use:
The less the number of flat teeth, the easier to punch holes.
Such as 2 teeth are easy to knock in,while 10 teeth, the force of the stamping is dispersed to a number of teeth, you need to use greater strength to knock.both the Japanese oblique flat cut and the French oblique flat cut are like this.
Punching with a rubber hammer or a hammer or a leather hammer is necessary for oblique drilling.
Plastic pad is needed underneath. Otherwise,the tool will be damaged.
colour:Silver
Material:White steel
Length:98mm/3.86 inch
Blade Width:2mm/0.08 inch
Teeth space:2.7mm/3.0mm/3.38mm/3.85mm
Package Contents:
3 * French Oblique Flat Cut(2 teeth/5 teeth/10 teeth)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.