2019 Wireless Bluetooth Pro Gamepad Controller For Nintendo Switch Console Gamepads Joystick left right | Электроника

2019 Wireless Bluetooth Pro Gamepad Controller For Nintendo Switch Console Gamepads Joystick left right | Электроника

Compatible with Nintendo Switch as a Replacement for Joy Cons

Not original Joystick controller.(No NFC )！ Not Support For HD vibration motor game！

If the wireless controller cannot be connected, please contact us to get the install pack for upgrading your wireless controller.

Blue and Red Joy Pads Compatible with Nintendo Switch.

Product Characteristics

1) This handle is compatible with Switch host and only supports wireless connection. 2) The handle can be used as a whole handle or as two independent handles. 3) No need to load any driver, the handle and the host can be used after wireless pairing connection. 4) Through wireless connection, it has strong anti-interference ability, easy operation and stable connection signal. 5) The built-in 300 mA polymer lithium battery can last about 4 hours after full charge. 6) This handle has built-in gyroscope to support motion sensing function. 7) Each of the left and right handles is equipped with a motor to support the vibration function. 8) Multiple wireless handles can be connected to the host to play multiplayer games at the same time. 9) Ergonomic design and lightweight handle construction, even if players play for several hours continuously, 10) The handle can be connected to the computer via a USB cable and upgraded with the update software

Controller parameter reference

Operating voltage: DC 3.7V-4.2V Operating current: 20-30mA USB input voltage/current: DC 5V/500mA Available distance: ≤8m Battery voltage/capacity: 3.7V/300mAh Controller power-on time: Around 4h (fully charged) Charging time: Around 2h Net weight: A pair of controllers: 80g A single Controller Dimension : 44 x 28 x 102.6mm Remark: The above parameters are for references only, they are subject to the actual product.

Product Use

1) First connecting handle to host Open the Switch host, in the main menu interface of the host, touch and click "Controllers" "Change Grip/order" with your finger to enter the host matching mode interface "Press L + R on the controller", ignoring "L + R". Note: Please connect each handle of the machine in this host pairing mode interface. A. The method of connecting a pair of children's handles (left handles + right handles) as a whole handle: Step 1: On the left handle, press the left key of the direction key and the screen capture key for 5 seconds to open the left handle. Four LEDs begin to circle and flicker rapidly. When one (or more) of the LEDs is always bright, the left handle pairing is successful. Step 2: On the right handle, press Y key and HOME key for 5 seconds to open the right handle. Four LEDs begin to flash in a fast cycle. When one (or more) of the LEDs is always bright, the right handle pairing is successful. Step 3: After the left and right handles are paired with the host successfully, press L1 and R1 keys at the same time. At this time, the corresponding LED lights on the left and right handles are long, indicating the success of connecting the computer. An integral handles (left handles + right handles) can be used. Press the B key to return to the host's home page. B. The connecting method of the left handle as an independent handle: On the left handle, press the left key of the direction key and the screen capture key for 5 seconds to open the handle. Four LED lights start to flash rapidly. When one (or more) LED lights are always on, it indicates the success of matching. At the same time, press the SL and SR keys on the side of the left handle. The corresponding LED lights on the side of the left handle are long, indicating the success of connecting the machine. The left handle becomes an independent handle and can be used. Press the left key of the direction key to return to the main page of the host. C. The method of connecting the right handle as an independent handle: On the right handle, press Y and HOME keys for 5 seconds to open the handle. Four LEDs start to flash in a fast cycle. When one (or more) of the LEDs is always on, the pairing is successful. At the same time, press SL and SR keys on the side of the right handle. At this time, the corresponding LED lights on the side of the right handle are long on, indicating that the connecting machine is successful, and the right handle becomes an independent handle and can be used. Press key A to return to the host's home page. 2) Connect the handle to the host again A. When the left handle and the right handle are used as a whole handle, press the HOME key for 2 seconds to open the handle, and the handle is automatically connected with the host. B. When the left handle is used as an independent handle, it opens the handle by pressing the screen capture key for 2 seconds. The left handle is automatically connected with the host computer. C. When the right handle is used as an independent handle, press the HOME key for 2 seconds to open the handle. The right handle automatically connects with the host computer. 3) Wake-up Handle In the sleep state of the handle, press the HOME key or screen capture key to wake up the handle, and the handle is automatically connected back to the host

What is Included

1 x pair of controllers 1 x controller charging cable 1 x user guide