Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство

Сохраните в закладки:

Цена:299,45RUB*

Количество:

Доставка в Эль-Монте, по России и СНГ


  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • История цены

    *История изменения цены! Указанная стоимость возможно, уже изменилось. Проверить текущую цену - >

    Месяц Минимальная цена Макс. стоимость Цена
    Feb-17-2026 380.53 руб. 388.8 руб. 384 руб.
    Jan-17-2026 308.76 руб. 314.63 руб. 311 руб.
    Dec-17-2025 374.31 руб. 381.80 руб. 377.5 руб.
    Nov-17-2025 371.46 руб. 378.0 руб. 374.5 руб.
    Oct-17-2025 296.8 руб. 302.59 руб. 299 руб.
    Sep-17-2025 365.31 руб. 372.28 руб. 368.5 руб.
    Aug-17-2025 362.13 руб. 369.41 руб. 365.5 руб.
    Jul-17-2025 359.17 руб. 366.33 руб. 362.5 руб.

    Новые товары

    Характеристики

    Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство

    Описание товара

    Introduction:   The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).       Features:   Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information) Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed)       20181106_151559_01120181106_151559_01220181106_151559_01620181106_151559_01320181106_151559_01420181106_151559_015


    Трекер стоимости


    Отзывы покупателей

    Новые отзывы о товарах

    Марина 23 Декабря 2021, 12:07 #

    Давно искала такие стульчики. Долго присматривалась. Взяла четыре и не пожалела. Очень удобно: когда надо ставишь за стол, если не... Читать отзыв полностью...

    Валентин 01 Января 2023, 12:54 #

    Покупал квадрокоптер RC drone на маркетплейсе wildberries у данного продавца, пришел товар не работающий и со сломанным пультом управления ,... Читать отзыв полностью...

    Anatol 29 Марта 2024, 03:08 #

    Где вставляется батарейка CR 2032 - под лицевой панелью ?... Читать отзыв полностью...

    Иаксим 19 Сентября 2025, 08:11 #

    Работает хорошо, жалко что нет инструкции на русском языке или видеообзора, об использовании. ... Читать отзыв полностью...

    Semenova94 26 Декабря 2021, 19:57 #

    Понравился дизайн свитера, решила заказать, товар пришел быстро, цвет и размер подошёл. Все как на фото. Доставка не дала долго... Читать отзыв полностью...

    Stas 01 Мая 2023, 21:43 #

    Отзыв о магазине professional-laptop-parts-supplier- fqparts- Store (Рейтинг 73.68%) https://aliexpress.ru/item/40009079 69596.html Заказал клавиатуру для ноутбука Clevo P775TM1-G, которая по заявлению... Читать отзыв полностью...

    Alexander Sokolov 14 Мая 2023, 20:29 #

    Why is the GK DRAW A3 Pro graph builder unavailable for purchase in Russia?... Читать отзыв полностью...


    Отзывы о Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство

    Данную страницу никто не комментировал. Вы можете стать первым.
    Введите символы или вычислите пример:
    captcha