60W 220V US/EU Hand-held Internal Heating Soldering Iron Automatically Send Tin Gun Station Wire Welding Repair Tool | Инструменты

60W 220V US/EU Hand-held Internal Heating Soldering Iron Automatically Send Tin Gun Station Wire Welding Repair Tool | Инструменты

60W 220V US/EU Hand-held Internal Heating Soldering Iron Automatically Send Tin Gun Soldering Station Wire Welding Repair Tool

Product parameters:
External heating type temperature adjustable soldering tin gun
Internal heating type temperature adjustable soldering tin gun
Power: 60W
Voltage: 110-220V
Plug：EU/US plug
Suitable for wire diameter: 0.5mm-1.2mm
Adjustable temperature: 200-450°
Alloy tip + ABS strong plastic
Working Temperature: 300-400 degrees Celsius

Feature:
1.Alloy tip, fast heating, durable
2.Natural mica heating core, heating up fast, long life, can be replaced, easily assembled and dismantled
3.High-quality ABS plastic shell, holding comfort, long-term operation will not fatigue
4.Tin wire scaffold can be disassembled, easy to use
5.With power indicator, safe
6.Power cord is soft, can be bent, more durable
7.Simple operation, novel design
8.Can be operated by one-handed, to view the tin situation at any time, not easy to make mistakes
9.Scientific design, not easy to stuck

Use:
1.Hand gun used for the first time, be warm a few minutes, a smoke is a normal phenomenon, will disappear in a few seconds.
2.Will be rated into the tin from the tin line into the mouth, and then pull the trigger
direction of the arrow until the tin lead solder wire to the nozzle only to be working.
3.Stop the use or replacement of tin wire to be out, as long as the direction of the board-up drive, and remove the tin wire.
4.Heater replacement, the first protective cover removed, open the heater connection,
and then remove the iron Tsui to the core of the heat can be replaced.

Notes:
1.At work, iron and iron pipe Tsui temperatures up to 400 degrees Celsius, non-human touch to prevent burns.
2.Stop using the hand gun, set it on its bracket.
3.Work is completed, turn off the power so to save the place after cooling.