Cross Bar roof rack rails with longitudinal groove Aero | Roof Racks & Boxes

Cross Bar roof rack rails with longitudinal groove Aero | Roof Racks & Boxes

Kit-2 PCs led

Design features.

They have a streamlined, aerodynamic shape, which allows to reduce air flow resistance when the car moves. Profile dimensions 67mm x 24mm. It is installed at any width between the rails arcs. Have a standardized groove for the installation of additional accessories for luggage carriers: mounting skis, bicycles, baskets, boxes, etc. The presence of an anti-friction insert on the top of the profile allows you to securely fix the load and protect the surface of the cross from damage. The insert in the lower groove of the profile prevents the appearance of aerodynamic noise.

Original design, Cross-sections look stylish and modern. There is an image of the commodity on the end caps of the transverseMark box.

Materials and Components of high quality-Toughened aluminum profile with anode or powder protective-decorative coating, elastic PVC profile.

Cross-bars have two kinds of coating:

1. anode Gray.Is a colorless anodized-oxide high-strength coating. This is the most reliable way to protect aluminum and its alloys from corrosion and other aggressive environmental impacts. The electrolytic-derived oxide layer has a density of hundreds of times the density of the natural oxide film. In comparison with other ways of coating (dyeing, varnishing, coating with polymeric films, etc.), anodizing excludes the problem of subfilm corrosion and separation. This coating has high decorative and operational properties. Due to the transparency of the anode film, the profile has a natural metal color. Before the coating, the profile is subjected to special processing, which creates a velvety surface sparkling in the sun.

2. polymer black.This kind of aluminum profile coating is double layer.

Installation method-Fastening is carried out in the groove on the inside of the railing profile.

Trunk loading capacity-Limited to the recommended load for a particular car. For most cars it is 40-50 kg.

Cross operation requirements:
1. do not exceed the recommended load on the roof specified in the car manual.
2. small and heavy cargo to be placed as close as possible to cross-sections.
3. when placing several cargoes on the trunk at the same time, distribute them evenly over the cross surface. And heavier things need to be placed closer to the supports, and lighter to the center of the cross.
4. securely fix the cargo to the transverse.
5. Additionally fix the drop ends of the long cargoes to the car body, to exclude their rocking during the transport process.
6. choose the most optimal mode of movement with reduced speed, avoiding sharp overclocking and braking.
7. the type of cross-section mounting shall be selected taking into account the height of rails, such as rails, as well as the possibility of installing additional equipment.

Categorically prohibited:Independently finalize, complete or repair the purchased goods, as this results in loss of consumer and operational properties of the goods, as well as loss of warranty.