Cast iron pot heat conduction plate stove | Обустройство дома

Cast iron pot heat conduction plate stove | Обустройство дома

1. Please note: this product is made of aluminum plate withSpots, scratches, etc!Because it's alloy, it's inevitable. Please pay attention to the appearance of the pro-do not buy, look at the real spots are more obvious. There are also a small number of scratches in the processing process, which can not be avoided.

2. There are a small amount of impurities in the gas flame. After a long period of heating,Black impurities Will remain on the heat conducting sheet. The shelf of the gas stove is made of cast iron. When the pot is pressed on it, scratches may occur when moving. One function of the thermal pad is to protect valuable cookware from fouling.

3. &When stewing or frying, the weight of the pot and food is very large, and the temperature difference between the inner and outer rings of the flame is very large, so the heat conducting piece maySmall deformationThe heat conduction sheet can absorb the temperature difference, thus protecting the enamel layer outside the cast iron pot. Please know.

4. The heat guide will be slightly uneven, there may be small pits on the side, please know. If you mind don't buy, thank you.

Size:

24 cm in diameter   Thickness approx. 3.4mm

Weight:

About 500 grams.

Texture of material:

Material: High thermal conductivity aluminum alloy (excellent thermal conductivity, feel cold at room temperature)

Features:

Surface passivation wear-resistant protective film treatment, high heat resistance, wear resistance

Brand:

BREADLEAF

Cast iron pot heat conducting piece,Use: