UV LED Lights Resin Solidify Photosensitive Curing Light Lamp for SLA/DLP 3D Printer 405nm 3000W Output Affect | Лампы и освещение

UV LED Lights Resin Solidify Photosensitive Curing Light Lamp for SLA/DLP 3D Printer 405nm 3000W Output Affect | Лампы и освещение

Note: To measure the power of UV lamps, you need to purchase a professional UV instrument for testing. Using power measurement is a wrong test method

note:

note: If you need to measure the W number of the lamp Please use LS128 professional LED detector Other measurements are inaccurate [Output wavelength]: 365nm \ 385nm \ 395nm \ 405nm (± 10nm) [Dimensions]: 408MM * 300MM [Wire Length]: 1.8M [Using light source]: High power LED ultraviolet diode (imported chip) [Heat dissipation method]: fan heat dissipation + aluminum alloy heat dissipation [Irradiation distance]: within 50MM [Use environment]: Conventional room temperature (0-40 ℃, humidity 20-85%), clean operation environment can be applied [Product features]: 1. Cold light source, no heat radiation; 2. Can be turned on and off repeatedly, ready to use, no preheating required; 3. Stronger energy [Usage]: The LED ultraviolet lamp should be as close as possible to the surface of the cured object. The closer the distance, the better. It is best to keep it within 1-8 cm. The irradiation distance that is too far will seriously affect the curing effect; [Scope of use]: UV curing (shadowless glue \ ink \ paint \ resin \ film), nail art, crystal glue, UV three-proof paint, photochemical catalysis, medical physiotherapy, aging test, UV printing, plastic printing, diazo Copier, mobile phone LCD screen, etc. [Warm reminder]: Pro, in order to achieve the best curing effect, please provide the UV glue parameters as much as possible, so that we can provide you with the most effective products.