DE Stock 3axis Nema23 stepper motor 272oz-in 3.0A 4wires & driver DM542A CNC Router Plasma controller kit | Обустройство дома

DE Stock 3axis Nema23 stepper motor 272oz-in 3.0A 4wires & driver DM542A CNC Router Plasma controller kit | Обустройство дома

What's in Box?

Detailed information:

1. Nema 23 stepper motor: 

Nema 23 stepper motor: 

Technical Specifications

Part No.:                          23HS7430

 Frame Size:                    NEMA23

Step Angle:                    1.8 degree

Voltage:                          3.0V

 Current:                          3.0 A/phase

Resistance:                    1.0Ohm/phase

Inductance:                    3.5mH/phase

Holding torque:             272oz-in

Rotor inertia:                  480 g-cm2

Detent torque:               0.6 kg-cm

Number of wire leads:  4 

Weight:                            2.20lb (1.0 kg)

Length:                            78mm

DM542A is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is smiliar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. 

3. Power supply:

The power of this power supply is 350Watts, and the output voltage/current is 24VDC/14.5A.

Hello,dear friend,thanks for you visiting my store very much.if you have any questions or need more detailed info of our goods,please feel free let me konw,I'll try my best to support you,thanks.

Wish you have a good shopping!:-)